 |
 |
Yamaha MSP Series Specifications
| General | |||
|
Crossover Frequency
|
2.5 kHz LF: 24 dB/oct, HF: 24 dB/oct |
2.5 kHz LF: 30dB/oct, HF: 30dB/oct |
n/a |
|
Overall Frequency Response
|
50 Hz - 40 kHz | 45 Hz - 40 kHz | 25Hz - 150Hz |
|
Maximum Output Level
|
101 dB | 106 dB | 111dB |
|
Magnetic Shielding
|
Yes | Yes | Yes |
| Speaker Section | |||
|
Components
|
LF: 5" cone HF: 1.0" Titanium dome |
LF: 6.5" cone HF: 1.0" Titanium dome |
LF: 10" cone |
|
Enclosure
|
Bass-Reflex Polypropylene |
Bass-Reflex Polypropylene |
Bass-Reflex MDF |
| Amplifier Section | |||
|
Output Power
|
LF: 40 W THD: 0.02 %, RL = 4 Ohm |
LF: 80 W THD: 0.05 %, RL = 4 Ohm |
LF 180W THD: 1%, RL = 8 Ohm |
| HF: 27 W THD: 0.02 %, RL = 6 Ohm |
HF: 50 W THD: 0.05 %, RL = 6 Ohm |
n/a | |
|
Input Sensitivity
|
XLR-3-31: +4 dBu PHONE: -10 dBu |
XLR: -3-31 +4 dBu PHONE: n/a |
XLR-3-31: +4 dBu PHONE: n/a |
|
Input Connectors, Impedance
|
XLR-3-31 (balanced): 10 kOhm PHONE (unbalanced): 10kOhm |
XLR-3-31 (balanced): 10 kOhm | XLR-3-31 (balanced): 10 kOhm |
|
Output Connectors
|
n/a | n/a | XLR-3-32 x 3 (balanced), parallel connection with Input |
|
Controls
|
LEVEL control: 31 Positions Detent type VR | LEVEL control: 31 Positions Detent type VR | LEVEL control: Center Click VR |
| LOW CUT switch: - | LOW CUT switch: FLAT/80 Hz (12 dB/oct)/ 100 Hz (12 dB/oct) |
n/a | |
| HIGH TRIM: +1.5/0/-1.5 dB at 15 kHz | HIGH TRIM: +1.5/0/-1.5 dB at 15 kHz | n/a | |
| LOW TRIM: +1.5/0/-1.5/-3 dB at 60 Hz | LOW TRIM: +1.5/0/-1.5/-3 dB at 45 Hz | n/a | |
| PHASE SWITCH: n/a | PHASE SWITCH: n/a | PHASE SWITCH: Normal/Reverse | |
|
Power Consumption
|
60 W | 100 W | 160W |