Yamaha ProAudio RMC Shipping Policies

Yamaha EMX 5016CF and EMX 5014C Specifications
  EMX 5016CF

EMX 5014C
Maximum Output Power per channel
  • 500 W/4 ohm
  • 350 W/8 ohm
  • 500 W/4 ohm
  • 350 W/8 ohm
T.H.D.
  • less than 0.3% (THD+N)
  • +14dBu output into 600 ohm@ 20 Hz -20 kHz
  • less than 0.3% (THD+N)
  • +14dBu output into 600 ohm@ 20 Hz -20 kHz
Frequency Response
  • -3, 0, +1 dB
  • 20 Hz - 20 kHz, ref to the 1kHz output level
  • Gain=Min, Pad=Off
  • -3, 0, +1 dB
  • 20 Hz - 20 kHz, ref to the 1kHz output level
  • Gain=Min, Pad=Off
E.I.N.
  • -128dBu, Gain=Max, 20 Hz - 20 kHz, ST OUT
  • -128dBu, Gain=Max, 20 Hz - 20 kHz, ST OUT
Crosstalk @ 1 kHz
  • -68 dB
  • -68 dB
Phantom Voltage
  • 48V (CH 1-15/16 XLR)
  • 48V (CHs 1-6, 7/8, 9/10)
EQ
  • HIGH: 10kHz, Shelving
  • MID Mono: 250-5kHz, Peaking
  • MID ST:2.5kHz, Peaking
  • LOW: 100Hz, Shelving
  • HIGH: 10kHz, Shelving
  • MID Mono: 250-5kHz, Peaking
  • MID ST:2.5kHz, Peaking
  • LOW: 100Hz, Shelving
CH Compressor
  • control x 1 (CH1-8; Gain/Threshold/Ratio)
  • N/A
CH Peak Indicator
  • LED turns on when post EQ signal reaches -3dB below clipping
  • LED turns on if post-EQ signal comes within 3 dB of the clipping level.
CH signal Indicator
  • LED turns on when post EQ signal reaches -10dB
  • LED turns on if post-EQ signal reaches -10 dB
STANDBY Switch
  • Mute all mono channels
  • N/A
Digital Graphic Equalizer
  • 9 band: 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz
  • 9 band: 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz
Frequency Response Correction (FRC)
  • System Pink Noise/Music mode
  • N/A
Feedback Suppressor (FBS)
  • Auto/Manual mode
  • N/A
FCL Indicator
  • N/A
  • Input signal level: -75dB
Maximizer (MAXIMIZE)
  • 3 band compressor on/off
  • N/A
Digital Effects
  • 2x SPX Digital Multi Effector
  • 24 bit AD/DA, 32-bit internal processing: 16 programs
  • Footswitch - Effect on/off: FC5 (optional)
  • 2x SPX Digital Multi Effector
  • 24 bit AD/DA, 32-bit internal processing: 16 programs
  • Footswitch - internal Effect on/off
Lamp (optional)
  • XLR-3-31 type, 12 V DC between pins 2 and 3, 5 W max.
  • N/A
Maximum Output Power Select Switch
  • 500W+500W, 200W+200W, 75W+75W
  • N/A
Power Amplifier Signal Select Switch
  • L/R, AUX1/MONO, AUX1/AUX2
  • N/A
Yamaha Speaker Processing
  • Speaker EQ on/off
  • N/A
Power Consumption
  • 500W
  • 450W

Note: Specifications subject to change without notice.
return to Yamaha EMX 5016CF or EMX 5014C