Studiomaster 16-2BPX
16 Channel Rack Mount mixer with DSP

The 162BPX is a 16 channel rack mount mixer with balanced mic/line inputs, custom DSP and all connections on the rear panel.

16-2BPX Front Panel  |  16-2BPX Rear Panel

The 162BPX boasts a total of 28 Inputs, regulated internal power supply and takes up just 6 spaces in a 19" rack.

The 16 channels are made up of twelve mic/line and four combination mic/stereo line inputs. This gives you the flexibility to connect 16 mics and 4 stereo devices simultaneously. Phantom power (+48V) is available on all mix XLR inputs so you can use condenser mics.

The mic/line channels feature three band EQ with mid sweep. The mid can be adjusted to get the best out of whatever you have connected. Mic/stereo channels feature a two band EQ. All channels benefit from two auxiliary sends (one pre, one post fader), pan, PFL switch and 60mm faders.

The effects module in the 162BPX offers you six reverb effects and six pre-set delays. The effects are three 'Vocal' sounds, an ADT effect and two reverbs while the delays range from 120ms to 720ms. The effects output can be routed to the main mix output and to the MON auxiliary output, so your performers can also hear the effects!

The 162BPX is housed in a steel, 6 space rack mounting chassis with all controls, including the power switch, on the front panel and all in/out connections on the rear panel.

Studiomaster Mixers  |  C3  |  C3X  |  16-2BPX