Monster Power Pro AVS 2000
Rack Mountable Automatic Voltage Stabilizer

The AVS 2000 is designed to stabilize power line fluctuations and maintain constant voltage to your professional components.

High Performance and Great Sound For Consistent 120V Output
Your professional audio equipment was designed to work at 120-volts AC. There's just one problem: 120-volts may not be the voltage your audio equipment get. Voltage irregularities can be caused by electric system brownouts, studio irregularities and sags can be caused by draining more power than the wiring was really designed to support. Plus, momentary sags that occur when heavy appliances like air conditioners and refrigerators start up.

The consequences may be increased distortion and reduced dynamic range, a click or pop or speed variation, or even total equipment failure resulting from components literally burning themselves up trying to make do with too-low voltage. On the road, the quality of electricity in the venues you play can vary widely, and the potential for damaging your sound and your gear with under voltage or over voltage is ever-present.

Designed To Stabilize Power Line Fluctuations And Maintain Constant Voltage
Monster PRO AVS 2000 Rack Mountable Automatic Voltage Stabilizer keeps your equipment running optimally and safely at precisely 120-volts, consistently and reliably. PRO AVS 2000 automatically corrects for under-voltage and over-voltage conditions, whether just for an instant or for an entire recording session or performance. The correction range is a wide 80 to 140-volts.

Power Protection for Serious Audio Pros
Voltage sags below the standard RMS value of 120 volts are often caused by appliances and professional gear that draw more power (over 1800 watts) than your studio was designed to support. This can have a direct effect on professional studio components, including amplifiers that require high power levels to operate at optimum performance level. As a result, sound can lose tone and clarity. Amplifiers change gain structure, which results in easy-to-hear distortions. They also won't deliver peak power.

With the PRO AVS 2000, all your high power devices will maintain the stability needed to deliver peak power and performance. You'll enjoy the smoothest, most natural sound and tone. And thanks to the sequential turn-on feature, your high power loads can operate at peak performance without causing unnecessary electrical stress that can pop a circuit breaker, cause an audible click, or damage your components.

Features

• Component-width chassis with built-in rack mounts and handles. Provides consistent 120V output when AC input fluctuates from 80-140V.
• Three easy-to-read digital meters for simultaneous monitoring of incoming voltage, amperage draw, and voltage correction.
• Color-coded eight current outlets - 4 programmable, sequential switched, and 2 unswitched.
• Automatically protects connected equipment in the event of extended over-voltage.
• Visual indicators for ground, line, neutral, surge protection, normal/abnormal voltage, and switched outlet status's.

• Accepts 3 to 30 volt DC turn-on capacity for remote operation and custom installations.
• 24k gold plated contacts on grounded plug for maximum conductivity.
• Heavy duty, extra-long high current 8 ft. Monster PowerLine® 300 cord for optimum power delivery.
• Embossed plate with The Head Monster, Noel Lee's signature.
• Two year limited warranty.
• Large image: Pro AVS 2000 | connections
• Dimensions and weight:
  7 1/2" H x 19" W x 17 3/4" D - 68.9 lbs