Mackie Onyx FireWire Card  
24-bit/96kHz FireWire I/O Option Card

The Onyx FireWire Card is a user-installable 24-bit/96kHz card which transforms the Onyx 1220, 1620 and 1640 mixers into digital audio interfaces capable of sending up to 18 channels of audio to your Mac or PC - without the need for additional converter boxes or hardware. Onyx mixers with FireWire rival the sound quality of dedicated audio interfaces. Not to mention the simplicity of plugging in up to 16 microphones and sending them directly from the mixer to your computer and monitoring a stereo mix back through the mixer.

Up to 18 Channels with Adjustable Sample Rate
The Onyx FireWire Card allows you to stream up to 18 channels of 24-bit digital audio to your Mac (OSX 10.3.5 or greater) or PC (Win XP). These show up in your audio software as 16 individual audio inputs, plus a stereo L/R mix. You can also send two channels of audio back from the computer to the mixer for monitoring purposes.

Audio coming back from the computer is monitored through the Control Room Source matrix, where it is routed to the Phones, Control Room, or Main Mix outputs.

Additionally, you can select the sample rate for the analog-to-digital converters in either the Onyx Control Panel (on the PC) or directly from your audio software (on the Mac - no control panel needed). Sample rate options include 44.1 kHz, 48 kHz, 88.2 kHz, and 96 kHz at 24 bits.

A Hub of Activity
The Onyx FireWire card features two 6-pin FireWire connectors that each supply all 16 channels plus the L/R mix. Having dual connectors allows you to place the Onyx mixer anywhere within a chain of FireWire-equipped devices. You can even daisy-chain two 16-channel Onyx mixers via FireWire and send 32 mic signals right to your laptop. (PC only; Mac support for mixer chaining coming soon.) This makes for a high-quality live recording rig that fits in the back seat of your car.

Adjustable Main Mix Trim
A small rotary knob provides boost and cut for the L/R mix signal being sent to your computer. Since the L/R mix signal is tapped prior to the Main Mix fader, this rotary knob gives you control over the signal level going to your audio software application without affecting your main mix level.

Everything You Need to Get Recording
The CD-ROM included with the Onyx FireWire card contains all the necessary drivers for PC, plus a software Control Panel. On a Mac, just plug in the FireWire cable and Onyx mixers will immediately show up as a 14x2 or 18x2 Core Audio device.

The CD also contains the full version of Tracktion, Mackie's multitrack recording and sequencing software for the PC and Mac. (And now, the Onyx FireWire Card includes a free upgrade to Tracktion 2.) So an Onyx mixer, a FireWire card, and a computer is literally all you need to start recording and producing music.

Features

Mackie mixers  |  Onyx-1640  |  Onyx-1620  |  Onyx-1220  |  Onyx FireWire Card