Kempton Audio GT12
Passive 2-way System 12", 250W

Kempton Audio's GT12 passive speaker features professional 2 x 4-pin Speakon connectors mounted to a recessed panel to prevent inadvertent operation.

All components were carefully selected and manufactured to Kempton’s specifications and tolerances and then severely tested for reliability for the Kempton GT Speaker series. The custom designed Woofers feature high strength curvilinear cones on die cast frames, high temperature resistant voice coils to prevent burnout failures and ferrite magnet structures to produce solid low frequency response. The HF compression drivers provide clean and clear high frequency output and are coupled to an 80°H x 50°V custom designed constant directivity horn for precise dispersion.

The Heavy Duty Crossover Networks that divide the signal going to the woofer and compression driver are constructed with oversize coils, high voltage capacitors and power resistors to provide the best possible sound quality and minimize signal loss. Independent LF and HF overload protection circuits are employed to protect the woofers and HF drivers from failures.

Kempton’s GT Series injected molded polypropylene enclosures feature an original proprietary cabinet design with smooth and flowing lines that immediately identifies the GT series appearance from the many Competitors models that look very much the same. The GT Series enclosures rugged construction and exterior finish were designed to handle the rigors of the road when used for portable sound reinforcement applications.

The Asymmetrical trapezoidal shape design provides a 45° taper angle for stage monitoring applications as well as for a general Front of House P.A. system

For speaker stand mounting all GTs are equipped with a 13/8" aluminum pole mount socket. The GT Series models feature ergonomically placed carrying handles for a balanced “feel” when handling / transporting.

Extremely rugged 0.05" steel grilles protect the woofer without detracting from its sonic performance in any way.

All GT enclosures are provided with multiple M10 fly points to accept standard M 10 eye-bolts to facilitate safe and easy flying capabilities. The enclosures are equipped with rubber feet and stacking positions that are molded into the cabinet enclosures, allowing stable stacking of 2 cabinet enclosures.

Specifications

• System Configuration: 2-way - full range
• Recommended amplifier: 250W rms
• Nominal Impedance: 8 Ohm
• Frequency response: 56Hz - 20kHz
• Low frequency woofer: 12" (2" coil)
• High frequency compr. driver: 1" (1.4" coil)
• Sensitivity: 97 dB
• Max SPL: 121 dB

• Dispersion: 80°x50°
• Crossover frequency: 2.5 kHz
• Recommended HP filter: 40Hz - 12/24dB oct.
• Input connectors: 2x4-pin speakon
• Dimensions and Weight
  24.8"(h) x 15.35"(w) x 13.78"(d) - 30.86 lbs