FBT MaxX Series  
MaxX2a | MaxX4a | MaxX5a | MaxX6a
MaxX2 | MaxX4 | MaxX5 | MaxX6
MaxX9 | MaxX9Sa | MaxX10SA

The new generation of FBT MaxX speakers features gas injection molded cabinets to achieve compact but sturdy products. The enclosures offer built in handle, a stand adapter and four anchoring points (M10) for wall and ceiling installation. The special design with flowing lines and rounded edges enables multifunctional use in all audio professional amplification systems: as stage monitor and with special adapters to enable cabinet stacking.

The new A.D.A.P. Advanced Dynamic Active Protection processor for total transducer protection and optimizing acoustic response. It guarantees total reliability even under the harshest conditions.

Output stages for low frequency unit with PWM (Pulse Width Modulation) technology enables reduction in weight on the ratio of 1:3, to achieve three times greater efficiency than conventional technology.

The MaxX Series is completely manufactured in Italy and carries a three year parts and labor warranty.

FBT MaxX Active Speakers

All Feature

• Two way design, custom B&C speaker with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminum basket. 1.4" compression driver coupled to a 90°H x 60°V horn
• Lightweight, yet rugged gas injected molded polypropylene cabinet construction.
• A front face steel grille protects the woofer from external damage.
• The asymmetrical shape also allows use as a powered floor stage monitor.
• Large image: MaxX2a, MaxX4a, MaxX5, MaxX6
• Specifications

FBT MaxX 2a  - Active Speaker 
200W + 50W - 2-way bi-amp powered system, 10" LF and 1" HF drivers with 3 band EQ

• 10"B&C speaker, 1.4" compression driver with horn
• Input: Balanced Neutrik combo jack, XLR, 1/4" TRS
• Output: Balanced Neutrik® XLR link out
• Adapters to stack the enclosures included.
• Optional: Wall bracket
• Large images: controls
• Dimensions and weight: 21.5"(h) x 13.75"(w) x 12"(d) - 28.7 lb

• 12" B&C speaker, 1.4" compression driver with horn.
• Input: Balanced Neutrik combo jack, XLR, ¼”TRS
• Output: Balanced Neutrik® XLR link out
• Adapters to stack the enclosures included.
• Optional: Wall bracket
• Large images: controls
• Dimensions and weight: 24.96"(h) x 16.03"(w) x 13"(d) - 35.25 lbs

• B&C 15” LF woofer, 1.4” HF driver with horn.
• 400w RMS Class D (PWM) Pulse Width Modulation low frequency amp, and a 100 w RMS Class AB high frequency amp.
• The control panel features a master volume control, preamp gain control, 3 band EQ with +- 15dB of cut/boost @ 80Hz LF, 12 dB of cut/boost @2.5k Midrange and +- 15 db cut/ boost @10kHz, a balanced Neutrik® input combo jack (female XLR, ¼” TRS, ¼”), balanced XLR link output jack, and ground lift switch, LED power on and separate HF and LF overload LED indicators.
• Input: Balanced Neutrik combo jack, XLR, ¼”TRS
• Output: Balanced Neutrik® XLR link out
• Optional: Wall bracket
• Large images: rear panel
• Dimensions and weight: 34.57"(h) x 23.42"(w) x 20.28"(d) - 55 lbs

FBT MaxX 6a   - Active Speaker  
700W + 200W, 2-way bi-amp powered system, 15" LF and 2" HF drivers with 3 band EQ

• B&C 15” LF woofer, 2.5” HF driver with horn.
• 700w RMS Pulse Width Modulation (PWM) low frequency amp, and a 200 w RMS Class G high frequency amp.
• The control panel features a master volume control, preamp gain control, 3 band EQ with + - 15dB of cut/boost @ 80Hz LF, 12 dB of cut/boost @2.5k Midrange and + - 15 db cut/ boost @ 10kHz, a balanced Neutrik® input combo jack (female XLR, ¼” TRS, ¼”), balanced XLR link output jack, and ground lift switch, LED power on and separate HF and LF overload LED indicators.
• Input: Balanced Neutrik combo jack, XLR, ¼”TRS
• Output: Balanced Neutrik® XLR link out
• Optional: Wall bracket
• Large images: rear panel
• Dimensions and weight: 30"(h) x 19"(w) x 16"(d) - 64 lbs

FBT MaxX Passive Speakers Feature

• Two way design, low frequency woofer with a neodymium magnet structure, die cast aluminum frame.
• High frequency driver coupled to a 90°H x 60°V horn
• Lightweight, yet rugged gas injected molded polypropylene cabinet construction.
• A front face steel grille protects the woofer from external damage.
• The asymmetrical shape also allows use as a floor stage monitor.
• The rear input panel features 2 Neutrik NL-4 Speakon inputs to allow daisy chaining an additional Maxx speakers.
• Large image: MaxX2, MaxX4, MaxX5, MaxX6
• Specifications

FBT MaxX 2  
250 w RMS, 10" woofer + 1.4" HF

• B&C 10” LF woofer, B&C 1.4” diaphragm HF driver, horn with a 1" exit.
• Input: Balanced Neutrik combo jack, XLR, ¼”TRS
• Output: Balanced Neutrik® XLR link out
• Dimensions and weight: 21.5"(h) x 13.75"(w) x 12"(d) - 24.25 lb

FBT MaxX 4
300 w RMS, 12" woofer, 1.4" HF 

• B&C 12” LF woofer, B&C 1.4” diaphragm HF driver, horn with a 1" exit.
• Input: Neutrik Speakon NL - 4
• Output: Neutrik® Speakon NL - 4 Link out
• Dimensions and weight: 24.96"(h) x 16.03"(w) x 13"(d) - 35.25 lbs

• B&C 15” LF woofer, B&C 1.4” diaphragm HF driver, horn with a 1" exit.
• Input: Balanced Neutrik combo jack, XLR, ¼”TRS
• Output: Balanced Neutrik® XLR link out
• Dimensions and weight: 29.8"(h) x 18.97"(w) x 15.71"(d) - 47.4 lbs

700w RMS, 15" woofer + 2.5" HF

• B&C 15” LF woofer, B&C 2.5” diaphragm HF driver, horn with a 2" exit.
• Input: Neutrik Speakon NL - 4
• Output: d Neutrik® Speakon NL -4 Link out
• Dimensions and weight: 29.8"(h) x 18.97"(w) x 15.71"(d) - 55.12 lbs

FBT Subwoofers

FBT MaxX 9
900W - 15" passive subwoofer

• B&C 15” woofer with a 4" dual voice coil, neodymium magnet structure and an aluminum die cast frame.
• Roto molded polypropylene cabinet.
• A front face steel grille protects the woofer from external damage.
• Dispersion: Omnidirectional
• Input: Neutrik Speakon NL -4
• Output: Neutrik® NL -4 link out
• Optional: Wall bracket
• Large image: MaxX9
• Specifications
• Dimensions and weight: 25.51"(h) x 19.53"(w) x  19.1"(d) - 57.32 lbs

FBT MaxX 9Sa
900W - 15" processed active subwoofer

• 15" custom speaker with coil of 4" with neodymium magnet. Die-cast aluminum basket.
• Polyethylene cabinet.
• Control panel for right and left channels with: XLR/Jack Neutrik TM, input XLR Neutrik TM, Link, Filtered signal output (high-pass) for satellites, General volume
• Dispersion: Omnidirectional
• Input: Balanced Neutrik combo jack, XLR, 1/4" TRS
• Output: Balanced Neutrik® XLR link out
• Optional: Wall bracket
• Large images: rear panel
• Specifications
• Dimensions and weight: 25.51"(h) x 19.53"(w) x  19.1"(d) - 64 lbs

FBT MaxX 10Sa
900W - 15" vented bandpass processed active subwoofer

• 15" Diecast frame aluminum custom LF woofer with 3" coil and neodymium magnet.
• Enclosure in enamel-finished 3/4"-13 ply Birch plywood.
• Control panel for right and left channels with: Neutrik Combo XLR/Jack input Neutrik, XLR link connector, filtered signal output (high-pass) for satellite speakers, master volume control.
• Dispersion: Omnidirectional
• Input: Balanced Neutrik combo jack, XLR, 1/4" TRS
• Output: Balanced Neutrik® XLR link out
• Optional: Mounting pole
• Large images: rear panel
• Specifications
• Dimensions and weight: 24.8"(h) x 19"(w) x 25.2"(d) - 90.4 lbs