| PA Systems
| Powered Speakers | Powered
Subs | Passive Speakers | Passive
Subs | Monitors | Accessories |
|
FBT
Jolly Series 
Jolly-15Ba,
Jolly-12Ba, Jolly-8Ba,
Jolly-Sub12a, Jolly-Sub10a
Jolly is FBT's complete range of polypropylene molded speaker systems
with 15", 12" and 8" drivers. They are extremely light
and sturdy with integrated 90x 60constant directivity horn,
carrying handle, 1.4" top-hat for stand-pole mount, 2 x M10 suspension
points and 45asymmetrical trapezoidal shape for stage monitor use.
Plus they are completely made in Italy.
FBT presses ahead with its highly successful strategy, using separate
class "G" and "AB" power amplifiers for woofers and
drivers (biamp) and ADAP processors (Advanced Dynamic Active Protection)
designed to limit amplifier saturation and speaker excursion, guaranteeing
complete reliability even in extreme conditions.
The Jolly range is completed by two amplified, vented
bandpass active subwoofers. The enclosures are 0.7" birch plywood
with internal reinforcement and scratch-resistant finish with ergonomically
placed carry handles and an integral speaker socket for satellite speakers.
These subwoofers are the ideal companion for loudspeakers in the Jolly
5 and Jolly 8 series to strengthen bass frequencies and extend the response
range, resulting in total increase of SPL.
The Jolly Series is covered by a three year parts and labor warranty.
|
|
 |
Jolly-15Ba
300W+50W, 2 way, Biamp, 15" + 1", combo
connector, mic/line, tone control, volume
- Custom 15" high efficiency high excursion woofer and
1" compression tweeter
- Custom 90x 60dispersion horn
- Built-in amplifiers: 300W rms MOS-FET for the woofer and
50 W rms for the high frequency unit
- 24dB/oct active filters
- Control panel with: Ground-lift switch, Combo XLR/jack
inputs, XLR male output, mic/line switch, 2 Band EQ - (high/low), limiter,
volume control.
- Optional: Accessories
- Dimensions and weight: 30"(h) x 19"(w) x 16"(d)
- 44 lbs
|
|
|
|
Jolly-12Ba
250W+50W, 2 -way, Biamp, 12" + 1", combo connector,
mic/line, tone control, volume
- Custom 12" high efficiency high excursion woofer and
1" compression tweeter
- Custom 90x 60dispersion horn
- Built-in amplifiers: 250W rms MOS-FET for the woofer and
50 W rms for the high frequency unit
- 24dB/oct active filters
- Control panel with: Ground-lift switch, Combo XLR/jack
inputs, XLR male output, mic/line switch, 2 Band EQ - (high/low), limiter,
volume control.
- Optional: Accessories
- Large images: rear
panel
- Dimensions and weight: 25"(h) x 16"(w) x 13"(d)
- 35 lbs
|
|
|
|
Jolly-8Ba
150+50W, 2-way, Biamp, 8" + 1", combo connector,
mic/line, tone control, volume
- Custom 8" high efficiency high excursion woofer and
1" compression tweeter
- Custom 90x 60dispersion horn
- Built-in amplifiers: 150W rms class G for the woofer and
50W rms for the high frequency unit
- 24dB/oct active filters
- Control panel with: Ground-lift switch, Combo XLR/jack
inputs, XLR male output, mic/line switch, 2 Band EQ - (high/low), limiter,
volume control
- Optional: Accessories
- Large images: rear
panel
- Dimensions and weight: 16"(h) x 10"(w) x 10"(d)
- 19 lbs
|
|
|
|
Jolly-Sub12a
300W - 12" vented bandpass active subwoofer
- Custom 12" woofer with 2" high linear excursion
coil
- Built-in 300W rms MOS-FET amplifier
- Active 24dB filter with subsonic filter and 12db filtered
output for satellite speakers
- Control panel with: combo inputs (jack - XLR) Left and
Right inputs, XLR Link, XLR filtered output for satellites, volume control,
ground lift switch, 0- 180phase reversal switching
- Optional: Accessories
- Large images: rear
panel
- Dimensions and weight: 21.5"(h) x 23.25"(w) x
19"(d) - 80 lbs
|
|
|
|
Jolly-Sub10a
300W - 10" vented bandpass active subwoofer
- Custom 10" woofer with 2" high linear excursion
coil
- Built-in 300W rms MOS-FET amplifier
- Active 24dB filter with subsonic filter and 12db filtered
output for satellite speakers
- Control panel with: combo inputs (jack - XLR) Left and
Right inputs, XLR Link, XLR filtered output for satellites, volume control,
ground lift switch, 0- 180phase reversal switching
- Optional: Accessories
- Large images: rear
panel
- Dimensions and weight: 25.5"(h) x 19.5"(w) x
19"(d) - 64 lbs
|
FBT | PA
Systems | Powered Speakers | Powered
Subs | Passive Speakers | Passive
Subs | Monitors | Accessories |