Edirol

RMC Shipping Policies

Edirol FA-101 Specifications

Number of Audio Record/Playback Channels

  • 44.1/48/96 kHz
    Record: 10 channels
    Playback: 10 channels
    Full duplex
  • 192 kHz
    Record: 6 channels
    Playback: 6 channels
    Full duplex
Signal Processing
  • PC interface 24 bits
  • AD/DA Conversion 24 bits (linear)
Sampling Frequency
  • Digital output  44.1/48/88.2/96 kHz
  • Digital input  44.1/48/88.2/96 kHz
  • AD/DA Conversion   44.1/48/88.2/96/192 kHz
Frequency Response
  • 96.0 kHz 20 Hz to 40 kHz (+0/-2 dB)
  • 48.0 kHz 20 Hz to 22 kHz (+0/-2 dB)
  • 44.1 kHz 20 Hz to 20 kHz (+0/-2 dB)
Nominal Input Level
  • Input Jack 1–2 (XLR type) -50 to -10 dBu
  • Input Jack 1–2 (1/4 inch TRS phone type) -35 to +4 dBu
  • Input Jack 3–6 +4 dBu (balanced)
  • Input Jack 7–8 -10 dBu to +4dBu(balanced)
Nominal Output Level
  • Output Jack 1–8 +4 dBu (balanced)
Residual Noise Level
  • Output Jack 1–2 98 dBu
    (input terminated with 1 k ohms, MAIN VOLUME: 0 dB, INPUT SENS: +4 dBu, DIRECT MONITOR VOLUME: OUT 1/2 position, IHF-A typ., Balanced)
S/N RATIO (Typical)
  • OUTPUT 108 dB
  • INPUT 102 dB
Interface
  • Firewire (IEEE1394)
  • Digital input/output Optical type (conforms to IEC60958)
  • MIDI IN/OUT
Connectors
  • Front Panel
    Input Jack 1–2 (XLR type / 1/4 inch TRS phone type)
    XLR type (balanced / phantom power +48V)
    1/4 inch TRS phone type (balanced)
    *INPUT2 jack: high impedance is supported
    Digital In Connector (Optical type)
    Digital Out Connector (Optical type)
    Headphones Jack (Stereo 1/4 inch phone type)
  • Rear Panel
    Input Jack 3–8 (1/4 inch TRS phone type (balanced))
    Output Jack 1–8 (1/4 inch TRS phone type (balanced))
    MIDI Connectors (In, Out)
    FireWire (IEEE1394) Connectors
Others
  • Power Supply DC 9 V (AC adaptor)
  • Power Current Draw 900 mA
Note: Specifications subject to change without notice.
return to the Edirol FA-101