Dynaudio Acoustics Support pages

RMC Shipping Policies
Easy Ordering Toll-Free 1-877-222-7457

Dynaudio Acoustics M2 Specifications
  • System: 3-way Passive Midfield/Main Monitor
  • Frequency Response (+/- 3 dB): 34 Hz - 20 kHz
  • Peak SPL 1m, pair (IEC Short Term): > 130 dB peak
  • Peak SPL 2m, 5.1 (IEC Short Term): > 131.5 dB peak
  • Amplifier: minimum 100 W (> 100 dB SPL @ 2m)
  • Sensitivity: (2.83 V/1m) 91 dB
  • Impedance, Nominal: 4 ohm
  • Impedance, HF (200 kHz): 9.6 ohm
  • Resonance Frequency: 45 Hz
  • Bass Principle: Bass reflex
  • Crossover Frequencies: 900/4500 Hz
  • Crossover Slope: Woofer 12 dB/oct; Midrange 12 dB/oct; Tweeter 18 dB/oct
  • Tweeter: Esotec 1.1" soft dome Magnetic fluid, Rear chamber, Pure aluminum wire voice coil, 0.16" die-cast aluminum front
  • Midrange: 3" soft dome, pure aluminum wire voice coil
  • Woofer: 2 - 8", polypropylene cone, 2" pure aluminum wire voice coil
Note: Specifications subject to change without notice.
return to Dynaudio M2