|
 Dynaudio
AIR Series Individual Speakers
AIR 6 | AIR
15 | AIR 20 | AIR 25
Dynaudio Acoustics AIR Series goes far beyond conventional monitor performance
in terms of sound, operation and thinking. An AIR system provides a complete
and integrated solution for critical monitoring. It consists of a number
of intelligent components that communicate through a network - in stereo
as well as in multi-channel systems. All components in an AIR system
are interconnected through the TC-Link network and distribute control
information as well as audio in-between all system components. This enables
controlling a multi-channel system from the sweet-spot using the AIR
Remote or the AIR Soft.
The Essence of Central Control
When working with wide dynamic range audio,
it is essential to control volume at the latest possible stage to assure
minimum noise and maximum resolution at all times. Any AIR remote provides
exactly that, because the TC-Link network allows each of the speakers to
be controlled right before the physical speaker: Outstandingly low noise,
perfect tracking across multiple channels, and the ability to control the
level regardless of the condition of the surrounding equipment. Additionally,
the three storable reference levels, presets, and mute/solo functionality
allow the user to always get a predictable performance from the AIR system.
AIR features three different options of central remote control: AIR-Soft,
AIR PC Installer’s Package (PC-IP), and the AIR Hardware Remote.
Utilizing the AIR Hardware Remote, adjustments are always at hand, so the
operator maintains control of levels regardless of the DAW or computer
state.
Stereo Monitoring Solutions
The direct digital input makes AIR an obvious
choice for any digital studio – seamless DAW to AIR connectivity.
The option slot may be equipped to accept analog or up to 192 kHz dual
wire signals, and source selection can be controlled through preset changing.
Link a nearfield and midfield set of AIR monitors (e.g. AIR 6 & AIR
25), share the input source and A-B between the two at the flick of a switch.
Acoustics and Calibration
The AIR concept features a lot of high quality
tools for optimizing performance in any given acoustic environment – be
it different rooms or placements. Precise adjustments to each individual
speaker, depending on its environment in terms of distance to reflective
or non-reflective surfaces, are done by choosing the appropriate placement
compensation and level alignment of each individual monitor in 0.1 dB steps.
Aiming at the same reference sound depending on the standard placement
compensation, possibilities include: Freestanding, Wall, Corner, Console
(on top of Console), Console - Wall, Console.
AIR Series Features |
- Dynaudio’s driver manufacturing methods are known for their high
quality and accuracy - AIR drivers are no exception
- Each amplifier and driver combination is individually calibrated
and matched to a 0.2 dB accuracy before leaving the factory
- AIR input connectivity accepts any format ranging from analog (96
kHz AD reference design) to digital AES (32-192 kHz) keeping an ultra
high precision and transparency, while being true to the incoming
signal - making integration with virtually any playback seamless
- Any AIR monitor allows a high level of user calibration (0.1 dB increments)
ensuring the setup to be consistently matched to the specific application
- Exchange any AIR model while maintaining the transparent Dynaudio Acoustics
sound. Use e.g. AIR 6 as the center or rear monitor with AIR 15 as
left/right fronts
- Placement filters, tone controls, 4 band parametric EQs (Installer’s
Package only) and positioning delays are included in every AIR monitor,
enabling maximum adaptation to physical placement
- Predefined “X-Curve” filters for “behind-screen” simulation
are included for film mixing
- Virtually any setup ranging from standard setups like 2.0, 5.2 or 6.1
to more specialized setups like 7.1, 10.2 or 12.2 are covered by AIR
- Predefined bass management filters or advanced independent HP/LP
filtering (Installer’s Package) secure optimal subwoofer integration
- Change setup, filtering, level calibration or bass management settings
at the flick of a button
- Secure consistent levels through the central volume control, reference
levels or presets. What you see is what you hear
- The TC-Link network secures perfect tracking central volume control,
speaker alignment and setup control whether using HW remote control,
Installer’s Package or AIR Soft
- Installer’s Package allows access to any system parameter as
well as control and locking of individual parameters, presets or the
entire system securing programmed settings
- Installer’s Package allows the entire system setup to be backed
up and restored for security or maintenance purposes
|
|
Dynaudio Acoustics AIR 6
Two-way active nearfield monitor - 6.9” woofer and 1.1” soft
dome tweeter
AIR 6 is developed for both stereo and multi-channel monitoring. Post
production facilities and music recording and mixing studios will benefit
greatly from the technology and clear monitoring that AIR 6 provides.
Installing an AIR 6 system will be equally advantageous when it comes
to small film editing rooms and OB vans.
- AIR 6 Master AD:
Analog
and Digital inputs, two-way 7" bass unit with 3"
voice coil, 1.1" softdome tweeter. Dual 200W PWM amplifiers.
- AIR
6 Digital Master: May be use in stereo or add
4 slaves/subs to expand to 5.1. Same drivers as the AD unit.
- AIR 6 Slave: Monitor with TC Link Inputs only.
- Dimensions:
13.3" x 8.5" x 13.6" - 26.4 lbs
|
|
Dynaudio Acoustics AIR 15
Two-way active nearfield monitor - 10” woofer and 1.1” soft
dome tweeter
AIR 15 is developed for both stereo and multi-channel monitoring and
will work seamlessly in the most demanding environments. For DVD authoring
and mastering, and for 5.1 productions where a clear and crisp sound
is imperative, the AIR 15 will get the job done. Even more so, the
AIR 15 is equally suitable for broadcast or edit suite purposes.
- AIR 15 Master AD: Analog and Digital inputs, two-way 10" bass
unit with 4"
voice coil, 1.1" softdome tweeter. Dual 200W PWM amplifiers.
- AIR 15 Digital Master: May be use in stereo or add 4 slaves/subs
to expand to 5.1. Same drivers as the AD unit.
- AIR 15 Slave: Monitor with TC Link Inputs only.
- Dimensions: 17.9" x 11.4" x 15.2" -
41.8 lbs
|
|
Dynaudio Acoustics AIR 20
Three-way active nearfield monitor - 10" woofer, 5.5” midrange
and 1.1 soft dome tweeter
The AIR 20 monitor is the first three-way design integrating the AIR
technology. Combining brand new Dynaudio 221 (two-tone) technology
with cutting-edge digital TC technology, the AIR 20 defines new standards
for performance and precision in three-way powered monitors. Designed
for stereo and multi-channel monitoring alike, any demanding environment
like post production, music recording and film editing will benefit
greatly from the technology inherent in AIR 20. DVD authoring, 5.1
productions and broadcasting will be equally honored by the perfect
integration and listening that the AIR 20 delivers.
- AIR 20 Master AD: Analog and Digital inputs, three-way 10" bass
unit with 4"
voice coil, 5.5" midrange and 1.1" softdome tweeter. Dual
200W PWM amplifiers.
- AIR 20 Digital Master: May be use in stereo or add 4 slaves/subs
to expand to 5.1. Same drivers as the AD unit.
- AIR 20 Slave: Monitor with TC Link Inputs only.
- Dimensions: 24.2" x 13" x 16.6" -
75.4 lbs
|
|
Dynaudio Acoustics AIR 25
Three-way active near/midfield monitor - two 10" woofers, 5.5” midrange
and 1.1 soft dome tweeter
AIR 25 is the “big brother” of the AIR Series. Delivering
unprecedented clarity combined with massive power, this monitor will
take care of the most demanding listening requirements. With four massive
built-in amps enabling more than 1200 watts of power, the AIR 25 is
designed for large music studios, and mastering and post production
facilities where power is an issue. This monitor is equally suited
for stereo as well as multi-channel monitoring.
- AIR 25 Master AD: Analog and Digital inputs, three-way 2x10" bass
unit with 4"
voice coil, 5.5" midrange and 1.1" softdome tweeter. 4
x 300W PWM amplifiers.
- AIR 25 Digital Master: May be use in stereo or add 4 slaves/subs
to expand to 5.1. Same drivers as the AD unit.
- AIR 25 Slave: Monitor with TC Link Inputs only.
- Dimensions: 20" x 21" x 17.7" -
100 lbs
|
