dbx

RMC Audio - We won't rub cheez on your neck
Contact us | Brands | FinancingHome

Easy Ordering Toll-Free 1-877-222-7457
dbx 376 dbx Silver Series 376
Tube Channel Strip w/Digital Out
Request our discount price.

The new dbx 376 Tube Channel Processor with digital output capabilities has taken the essential tools needed for channel strip processors and has greatly added to the feature list, making it an all inclusive toolbox that offers all of the effects required. With an effect menu list that includes such standard features as: a tube preamp section, 3-Band parametric EQ section, Compressor, De-Esser and digital outputs, the 376 is the perfect companion piece for recording and tracking vocals and mic'd applications in the analog and digital domain.

The 376 Tube Channel Strip w/Digital Output is the latest addition to the Silver Series family. The 376 puts the best of both worlds into one affordable package by combining the warmth of the vacuum tube, with the proprietary dbx Type IV conversion system. The 376 boasts many of the same features as other products in the Silver Series, such as +48V phantom power, a phase invert switch, and low cut filtering.

In addition, the 376 also offers digital output capabilities in both AES/EBU, and S/PDIF formats as standard features. The high impedance, 1/4" instrument input located on the front panel, as well as the mic/line switch, and 20 dB pad show their dedication to providing convenience in the studio. The LED meters provide a clear and concise visual of the signal processing at a glance.

The rear panel includes both mic and line inputs and outputs, word clock sync input and output, insertion jack and digital outputs. Add selectable sampling rates of 44.1 kHz, 48 kHz, 88.2 kHz, or 96 kHz; selectable dithering and noise shaping; and separate analog and digital output controls to this already impressive list of features, and we think you'll agree that the 376 lives up to the uncompromising standards of dbx Professional Products.

Features

  • Tube microphone pre-amp
  • 200V tube plate voltage
  • Selectable mic/line switch
  • +48 Volt phantom power
  • 3-Band Parametric EQ
  • Compressor
  • De-Esser
  • Front panel instrument input
  • Drive meter LEDs
  • Threshold and De-Esser meters
  • 8 segment analog or digital meter
  • Type IV conversion system
  • Selectable sampling rates (96, 88.2, 48,44.1kHz)
  • 24, 20 and 16 bit wordlengths
  • AES/EBU and S/PDIF digital outputs
  • Selectable dither and noise-shaping algorithms
  • Word clock sync input and output
  • Specifications

Instrument Input (Front Panel)

  • Connector: TS 1/4" Jack Type: Unbalanced
  • Impedance: 470 k ohm
  • Max Input Level: +21dBu unbalanced

Microphone Inputs

  • Connector: Female XLR Pin 2 Hot
  • Type: Electronically balanced/unbalanced
  • Impedance: 330 ohm
  • Max Input Level: -9 dBu or +11 dBu with 20 dB pad engaged
  • CMRR: >40dB, Typically 55dB
  • Equivalent Input Noise: Typically -120 dBu with a 150ohm source load, 20Hz to 20kHz BW

Line Inputs (rear panel)

  • Connector: TRS 1/4" Jack
  • Type: Electronically balanced/unbalanced
  • Impedance: 20kohm unbalanced, 40k ohm balanced
  • Maximum Input Level: +21dBu balanced or unbalanced
  • CMRR: >40dB, Typically 55dB
  • Gain (Drive Control) -15dB to +15dB

Analogs Outputs

  • Connector: Male XLR Pin 2 Hot and TRS 1/4"
  • Type: Servo-balanced/unbalanced
  • Impedance: Balanced 120 ohm, unbalanced 60ohm
  • Max Output Level: >+21 dBu, >+20 dBm (into a 600 ohm load)

dbx preamps  286A  |  376  386  |  786  |  ProVocal


Cables . Computer/MIDI . E-Drums . Headphones . Inst.Amps/Effects . Microphones . Mixers
PA Speakers . Power Amps . Processors/Effects . Recording Gear . Stands/Cases . Studio Monitors