Crown Audio
RMC Audio - We won't rub cheez on your neck
Contact us | Brands | Financing | Home

Easy Ordering Toll-Free 1-877-222-7457

Crown I-Tech Power Amps Crown I-Tech Series
I-T8000, I-T6000, I-T4000
Request our discount price.

The Crown I-Tech Series offers amazing power, light weight and ease of use for touring sound and installed sound applications.

Onboard DSP provides a wide array of signal processing, greatly reducing the need for rack components and rack wiring. Onboard DSP features 24-bit, 96 kHz A/D and D/A converters.

All models are compatible with the HiQnet Network and TCP/IQ networking. Digital audio and HiQnet/IQ control signals connect to the amp via a single CobraNet cable in optional CN models, coming soon. Pushbutton DSP presets simplify the setup for various loudspeaker arrays.

The Global Power Supply works anywhere in the world, and offers PFC (Power Factor Correction). It is a switching power supply for reduced weight. I-Tech amplifiers have the highest output voltage in the industry (200V peak), which provides clean transient peaks. The 3rd-generation patented Class-I (BCA®) circuitry couples power efficiently to the load and allows low AC current drain. A front-panel control screen shows advanced diagnostics and status information.

Power Rating
I-T8000 Stereo (per channel) Mono
8 ohm
4 ohm
2 ohm
8 ohm
4 ohm
2100W 4000W 3500W 8000W 7000W
I-T6000 1500W 3000W 2500W 6000W 5000W
I-T4000 1250W 2000W 1800W 4000W 3600W

Features
  • Unmatched power in a lightweight chassis.
  • Global power supply with Power Factor Correction.
  • Onboard DSP.
  • Connects to Harman Pro HiQnet and Crown TCP/IQ network (CobraNet input available in optional CN models, coming soon).
  • LCD control screen allows easy setup, diagnostics, and DSP presets for various loudspeakers.
  • Includes: Rear rack ears with integral EZ-Rack pin, rack screws, operation manual, power cords, foam air filter.
  • Analog Input Connectors: A 3-pin female XLR connector for each channel.
  • Digital Input Connector: A 3-pin female XLR connector that accepts a digital signal in the AES/EBU format.
  • Output Connectors
    • Two high-current, 50A Neutrik Speakon NL4MLP (mates with NL4FC or NLT4FX), one per channel.
    • Two pairs of high-current, 60A color-coded 5-way binding posts (for banana plugs, spade lugs or bare wire).
    • Two male XLR passive analog loop through.
    • XLR active/re-clocked AES/EBU digital loop through.
  • Large image: I-Tech series, rear panel
  • Specifications
  • Dimensions: 3.5"H x 19"W x 16.2"D - 2U
  • Weight: 28 lb
Crown power amps  |  CDi series  |  I-T8000  |  I-T6000  |  I-T4000  |  XTi series

Cables . Computer/MIDI . E-Drums . Headphones . Inst.Amps/Effects . Microphones . Mixers
PA Speakers . Power Amps . Processors/Effects . Recording Gear . Stands/Cases . Studio Monitors