|
 Audio
Technica AT849
Stereo Boundary Microphone
Designed for surface-mount use in high-quality sound reinforcement,
broadcasting and recording applications, this robust microphone delivers
clear and intelligible audio reproduction. With true stereo output and
twin XLR output connectors, the AT849 features closely matched, optimally
positioned elements that deliver the spatial impact and realism of a
live sound field.
The microphone’s heavy die-cast case and rubber
bottom pad minimize coupling of surface vibration. The mic features switchable
low-frequency roll-off and low-profile design for minimum visibility.
Features
|
- Designed primarily for surface-mount applications in broadcast, professional
recording and sound reinforcement
- Closely-matched optimally-positioned
elements deliver the spatial impact and realism of a live sound field
- Heavy die-cast case and rubber bottom pad minimize coupling of surface
vibration to the microphone
- Switchable low-frequency roll-off
- Low-profile
design for minimum visibility
- Output Connector: Integral 5-pin TB5M
- Cable 25' long, shielded, vinyl-jacketed, stereo cable
with 5-pin TA5F connector at microphone end, two 3-pin XLRM-type connectors
at output end
- Accessory furnished: Soft protective pouch
|
- Elements: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: X/Y stereo
- Frequency Response: 30-20,000 Hz
- Low Frequency Roll-off: 150 Hz, 6 dB/octave
- Sensitivity: -40 dB (10.0 mV
- Channel Balance: <=2.5 dB
- Impedance: 200 ohms balanced
- Max Input Sound Level: 137 dB SPL
- Dynamic Range: 110 dB
- Signal-to-Noise Ratio: 67 dB
- Phantom Power Requirements: 9-52V DC
- Switch: Flat, roll-off
- Dimensions: 3.62" max length, 2.87" max width
- Weight: 5.3 oz.
|
