|
Allen & Heath Xone-32
DJ performance mixer
The Xone range of DJ mixers represent the ultimate aspirations of serious
professional DJ's the world over. All the Xones include cool controls
like the Voltage Control Filter, allowing you to get fully creative with
your mix, while the VCA crossfader gives the cleanest sound possible.
The DRS digital recall system on Xone:32 allows recall of filter settings
at the touch of a button.
Allen & Heath products have always been built with the real world
in mind and DJ mixers probably come close to the top of the league for
rough treatment. Long hours of hard use night in, night out are one thing,
but on top of this, a mixer has to cope with condensation, smoke and vibration,
not to mention the horrors of being dropped and spilled upon.
The way they build them reflects the way they expect them to be used.
Vertical circuit boards are used throughout and all the rotary controls
are firmly anchored to the front panel with threaded steel nuts, insulating
internals from heavy blows and minimizing damage from moisture. So, while
you're giving the performance of your life, you know that shiny mixer
in front of you is not going to let you down.
3 Dual Stereo Channels
Channels have RIAA [RCA] inputs and [TRS] stereo line level inputs, with
powerful 3 band EQ. All channels have 3 color bar meter and gain control,
EQ on switch and 2.4" fader.
Mic Channel
XLR input with gain control and 2 band EQ, including HPF. Located on front.
Routes direct to mix outputs.
Stereo Mix Outputs
Balanced mix outputs on TRS with level control, plus secondary RCA pre-fade
outputs for recording. The mix signal is displayed on 12 segment 3 color
peak reading bar meters.
Auxiliary Send
All channels have a post fade stereo auxiliary send, so a program feed
to a zone is possible. The outputs are [TRS] jacks.
3 Band EQ
Powerful 3 band EQ with 'asymmetric' characteristic; +6dB boost to
preserve headroom and -26dB cut for creative mixing.
VCA Cross Fader
High quality dual-rail gold-contact 1.8" fader with contour control,
reverse switch and led, plus bypass switch with led. CH1 is routed to
X, CH3 is routed to Y, CH2 does not route through the x-fader.
Transmute Buttons
A unique function which combines 'transform' and 'punch' DJ
effects for intelligent and creative live performance. Works in conjunction
with x-fader using X & Y buttons.
VCF Filters with DRS Presets
Choice of High Pass, Band Pass, Low Pass or multiples e.g. notch. Resonance
- adjusts Q from 'mild to wild'. VCF slider controls filter from
100Hz to 20kHz. Channels have individual VCF on buttons with blue led.
VCF can also be modulated by a low frequency oscillator with performance
controls. DRSTM presets allow store and recall of 4 VCF performance settings
including Channel on, VCF type, LFO on and LFO X2.
LFO with Tap Tempo
Low Frequency Oscillator. Modulates VCF. Tap Tempo button allows the speed
of the LFO to be set to the track. X2 switch doubles the speed. On switch
activates the LFO and allows VCF slider to control depth.
Engineer / DJ's Toolbox
High powered headphone output with level. Booth output on [TRS] with level.
12 segment 3 color bar metering displays mix. Channels have 4 segment
3 color bar meter. Channel cue / main mix fader adjusts headphone monitor
to suit. Cue switches are interlocked / auto cancel.
PSU
High performance internal switched-mode power supply. Universal mains
input voltage.
Features
|
