|
 Allen
& Heath ML3000 Series
15 buss live sound VCA console
Frames Available
A models: 24+2, 32+2, 40+2, 48+2
B models: 20+6, 28+6, 36+6, 44+6
Never before has a fully equipped VCA desk been accessible to so many
people. Once again Allen & Heath applied their design skills to making
a previously exclusive technology affordable to people on a real world
budget.
They've also included their unique LCRplus panning system, bringing sophisticated
signal imaging within reach for smaller shows. All this power is harnessed
in a remarkably compact console which is a real pleasure to drive thanks
to its simple, uncluttered control layout.
Dual Functionality
GRP/Aux mode switches reverse the group fader and aux rotary master sections
to allow you to choose any combination of up to 8 Aux sends and up to
4 audio subgroups on fader masters with inserts and full metering. A Center
Mode switch converts the 4" C fader to an engineer's listen wedge
control with insert
4 Audio Groups
Assigned from paired routing buttons and pan from channel. Groups are
routed to LCRplus via a single button
8 VCA Groups
Using a similar soft-controlled system and the same CPU as the ML4000.
Master View button allows checking of selected group assignments. High
quality VCA's are fitted to mono and stereo input channels
8 Auxiliary Sends
5-8 with faders on masters. 7-8 can be configured as stereo pre/post fade
pair for i.e.m. Auxes 1- 4 have rotary masters in Group Mode, and fader
masters with inserts in Aux Mode. Auxes have balanced XLR outputs
LCRplus Panning
Available from channels and groups. Uses blend and pan controls to allow
any signal positioning across the C and LR busses
8x4 Matrix
Fed from the groups and the LR and C busses. With inserts and external
input. Matrix has VU meter access
8 Mute Groups
Input channels have soft mutes and are part of the mute grouping and MIDI
control. Soft assignment is the same as ML4000
4 Band EQ
Responsive feel with separate controls for sweep and cut/boost on mid
bands
2 Dual Stereo Channels
Additional to the channel count, mixable A&B [TRS] inputs with gain,
4 band EQ and mono summing
ML Mic Pre with swept HPF
Same extended frequency response through signal path as the ML5000. Swept
off - 400Hz HPF. New pot law for smoother gain range with swept HPF
Balanced XLR plus Inserts
Gold plated XLR connectors. Inserts [TRS] on channels, fader masters,
auxes 5-8 and LCR
PAFL system
PFL overrides AFL. Led status indicators on channels and global status
indication on meterbridge
128 Snapshot memories
Show automation of VCA assignment / mute 'scenes' via MIDI/RS232 and 'Archiver'
software
Talkback
Talk to any of the fader master group/aux and LRC outputs via TB enable
switches with led in each section. +48V and trim control for mic
Engineer's Toolbox
Phones, wedge and local monitor controls, - 20dB 'dim' when TB active.
Pink noise and oscillator, ground compensated direct outs on channels,
2TRK, LR & C monitor selection with mono check. VU metering has built
in peak led. TB/OSC output [TRS]
Lamps
3 XLR lamp sockets are provided
Configuration options
Internal jumpers to configure Aux1 to direct out, pre/post direct out,
pre/post EQ/pre-insert for the pre-fader source. Isolate pre-fade from
channel mute. Pre insert / post fade for 2 track recording source
Features
|
