Easy
Ordering Toll-Free 1-877-222-7457
|
|
||
Easy
Ordering Toll-Free 1-877-222-7457 |
||
 |
ADAM Audio Sub8 The Sub8 houses an excellent 8" woofer with a large 50mm voicecoil, and is driven by a 160W ICE Power amp. This amp stays cool while handling maximum power levels even if they are sustained. The front baffle features two motorized knobs that let you tailor input level and crossover frequency settings for the best performance in your studio. These knobs can be controlled with an included wireless remote, allowing you to optimize your sound reproduction from your ideal listening position. The Sub8 is an ideal match for ADAM Audio monitors such as the A7, ANF10, P11A, S1A and S2A.
|
| back to top
|
|
 |
ADAM Audio Sub10 MK2 The Sub10 MK 2 is a powerful subwoofer designed to extend the low frequency capabilities of any near-or midfield monitoring system. The Sub10 MK 2 houses an excellent 10" woofer with a large 2" voice coil,and is driven by a 200 W Ice Power amp. This amp stays cool as it uses PWM (pulse width modulation) in the amp and the power supply section, thus arriving at a >80%over all efficiency. It can handle its maximum power without danger for the electronics or the driver. The now available MK 2 version works with a new downfiring bass reflex tube, that due to its shape and size avoids "breathing" noise from the tube with much more effect. For larger rooms or higher levels it is possible to chain as many Sub10 MK 2's as necessary. All in-and outputs have both XLR and RCA connectors. The Sub10 MK 2 is an ideal match for ADAM monitors such as the P-Series or the S1A through S3A studio monitors.
|
| back to top
|
|
|
ADAM Audio Sub12 For larger control rooms or auditoriums the Sub12 is an even better choice. This larger unit houses a 12" woofer capable of producing a 3 dB higher SPL max output. The wide bass reflex tube fires downwards; due to its size and construction ventilation noise is successfully avoided.
|
| back to top
|
|
|
ADAM Audio Sub20 The Sub20 is meant to reproduce LFE or other low frequency signals above 25Hz in medium sized or larger control rooms. It is equipped with 2 long throw 10“ drivers that are mounted at the opposite sides of the cabinet. Due to this alignment the forces applied to the cabinet are opposite to each other and consequently compensate themselves, so that the cabinet stays much quieter than with conventional arrays. Distortion is drastically reduced that way, the clarity of the signal is improved especially at higher levels. There are 2 downfiring bass reflex tubes that because of their size and construction successfully avoid ventilation noise.
|
| back to top
|
|
|
ADAM Audio Sub24 The Sub24 is meant to reproduce LFE or other low frequency signals above 22Hz in medium sized or larger control rooms. It is equipped with 2 long throw 12“ drivers that are mounted at the opposite sides of the cabinet. Due to this alignment the forces applied to the cabinet are opposite to each other and consequently compensate themselves, so that the cabinet stays much quieter than with conventional arrays. Distortion is drastically reduced that way, the clarity of the signal is improved especially at higher levels. There are 2 downfiring bass reflex tubes that because of their size and construction successfully avoid ventilation noise.
|
| ADAM Audio subwoofers | Sub8 | Sub10 MK2 | Sub12 | Sub20 | Sub24 | |
