Event Electronics

RMC Shipping Policies

Eventide DSP4000B+ Specifications

Analog Inputs

24 bit conversion

Any combination of 2 XLR (20kohms bridging) or 2 mono jacks (150kohms)

Impedance

20kOhm, Bridging

Full Scale Input Level

26dBu
Dynamic Range
105dB

Signal to Noise Ratio

105dB A-weighted

THD+N

less than .0025%@ 1kHz, -3dBF
Crosstalk
less than -100dB @ 20Hz to 20 kHz, -3dBFS
Frequency Response
+0/-0.1dB @ sample rate
44.1KHz: 20Hz-20kHz, 48kHz: 20Hz-22kHz
88.2kHz: 20Hz-41kHz, 96kHz: 20Hz-44kHz
+0/-3.0dB @ sample rate
44.1KHz: 5Hz-21kHz, 48kHz: 5Hz-23kHz
88.2kHz: 5Hz-42kHz, 96kHz: 5Hz-46kHz
Analog Outputs

XLR balanced

Impedance
less than 50Ohm
Full Scale Output Level
26dBu
Dynamic Range
105dB
Signal to Noise Ratio
105dB A-weighted
THD+N
less than .0025%@ 1kHz, -3dBFS
Crosstalk
less than -100dB @ 20Hz to 20 kHz, -1dBF

Frequency Response

+0/-0.1dB @ sample rate
44.1KHz: 10Hz-20kHz, 48kHz: 10Hz-22kHz
88.2kHz: 10Hz-41kHz, 96kHz: 10Hz-4 4kHz
+0-3.0dB @ sample rate

44.1KHz: 5Hz-21kHz, 48kHz: 5Hz-23kHz

88.2kHz: 5Hz-42kHz, 96kHz: 5Hz-46kHz
Bypass Relay
AES and AUDIO signals bypassed at power down
Remote Control
Inputs
Up to 2 foot pedals (or 5V control inputs) or 6 footswitches or combination
Outputs
2 isolated relay closures, rated 1A at 30VDC
MIDI Connections
5 pin DIN Output and Thru

7 pin DIN Input with Output capability

PCMCIA Interface
68 pin PCMCIA 2.0/JEIDA 4.0
Supports type 1 SRAM cards up to 4MB for data storage
Factory Preset Capabilities
(at 48K sampling)
Pitch Shifting: up to 11 voices
Compressor/Limiter: up to 4 instances
Equalization: up to 128 bands parametric single input, 64 bands at 2 channles
Digital Delay
Up to 87 seconds mono in addition to any installed sampler
Sample Rates
96, 88.2, 48, 44.1, KHz External
Digital Inputs/Outputs
2 AES/EBU or SPDIF at 44.1 to 96KHz
Note: Specifications subject to change without notice.
return to the Eventide DSP4000B+